Posts Tagged ‘Headlightdepot’

Audi A8 super high-tech headlights

Tuesday, January 21st, 2014

Highly effective: new turn signal light in the Audi A8

-Indicator LEDs light up sequentially in the turning direction
-Advanced turn signal light is a component of the Audi Matrix LED headlight

In the new Audi A8, the turn signal light consists of lighting elements that illuminate in a defined sequence; this makes it easier for others to perceive the driver’s turning intentions, even under difficult conditions.

In the new Audi A8, the turn signal lights will now indicate the turning direction in an innovative way, which has the potential to significantly enhance traffic safety. That is because the lights provide a visual signal that can be clearly and quickly perceived, even at long distances and in poor visibility.

Each of the enhanced headlights contains18 light-emitting diodes arranged in a strip that is subdivided into seven blocks. Each tail light contains 24 LEDs in eight segments, which are used to dynamically indicate the turning direction. During flashing, the blocks are sequentially activated at 20 millisecond intervals, from the inside outwards in the desired turning direction. After 150 milliseconds, all segments are bright; for another 250 milliseconds they illuminate with full intensity. Afterwards, the turn signals go dark before repeating the lighting sequence.

Considering their capabilities, the Audi Matrix LED headlights can be regarded as a cutting-edge innovation. In each headlight, 25 light-emitting diodes generate a highly variable high-beam light. When the on-board camera detects other vehicles ahead, the Audi Matrix LED headlights mask the relevant sections of the high-beam by dimming or shutting off individual diodes. Very bright illumination is preserved in the remaining zones.

The Audi Matrix LED headlights also feature navigation-based cornering lights and, in cooperation with the night vision assistant, a marker light that warns the driver of pedestrians in the dark and which also alerts the pedestrians.

Audi will be presenting the upgraded A8 in September at the IAA International Motor Show in Frankfurt.

Source: Auto Blog

Intel Developing Headlights?

Friday, January 17th, 2014

When computer hardware companies start getting involved with the development of automotive technologies, you can be sure some futuristic stuff is about to go down. How does invisible rain sound to you? Intel, along with Carnegie Mellon University, has come up with an idea for a new headlight system that can make rain seem to disappear from the driver’s direct line of sight.

According to CNET, the headlight uses a camera housed within the headlight assembly to detect rain (and presumably snow or hail) as it falls, and then it uses a processor to anticipate the path of the rain. Finally, the actual light is created by a projector, which uses the information supplied by the processor to block out the pixels where the rain is expected to be. This technology, as you can see in the image above, should help improve visibility since there will be less light reflected back at the driver by raindrops.

For now, the only way you can see this rain-cancelling technology is in a demonstration in the video report posted below, but Intel thinks that it could make its way into production within the next 10 years.

Audi promises production laser headlights

Friday, January 17th, 2014

udi is showing off new laser headlight technology this week at the 2014 Consumer Electronics Show on its Audi Sport Quattro Laserlight Concept, and most intriguingly, the automaker has plans to use the long-range lighting on production vehicles. Audi CEO Rupert Stadler tells Automotive News that this type of headlights will be used on a future production vehicle, although he did not specify any timeframe.

On the concept vehicle, the headlights employ LED low beams, while the high beams use the laserlight technology. Audi says that these lights are not only very small (“a few microns in diameter”) they are also able to light the road for almost a third of a mile (1,640 feet), with three times the brightness of an LED highbeam, yet with pinpoint control. These lights have already been confirmed for use in motorsports on the 2014 Audi R18 e-tron Quattro LMP1 racecar, and the tech will eventually trickle down to road-going cars.

In addition to how long this trickle down will take, it’s doubtful we’ll see these lights in the US anytime soon. Audi is still working with the US Department of Transportation for approval of its LED Matrix Beam headlights, which are already sold in other markets, and the negotiations appear to be taking quite a bit of time. Automotive News also notes that the laser headlights earmarked as options on the 2015 BMW i8 will not be offered in the US, either.

NHTSA upgrades Corvette headlight investigation

Thursday, January 16th, 2014

It’s looking more and more likely that we’ll be seeing a recall of certain sixth-generation Corvettes, as the National Highway Traffic Safety Administration has upgraded its initial investigation to an engineering analysis, the final stage before the Feds can request a full-on recall. The problems, which we first reported on back in May, had to do with headlights that would randomly cut out for some 2005 to 2007 Chevrolet Corvette models. NHTSA has received 95 complaints from owners of random headlight failures, while The Detroit News states that there have also been four reports from owners of 2008 Vettes.

The issue, which affects 103,374 cars, is believed to be caused by a fuse block in the engine bay. Located in a high-heat area, it can short out when exposed to increased temperatures, leading to the headlight failure. It’s not entirely clear if the issues extend to the Corvette’s Z06 and ZR1 variants.

General Motors is cooperating with NHTSA throughout the investigation, a spokesperson told The News.

News Source: The Detroit News, Auto Blog

Dangerous Problems of Dim Headlights

Saturday, January 9th, 2010

This is an article I found on CSB3’s website at that discusses dim headlights.

by Ukee Washington

Is being on the road hard on the eyes? Hard to see what’s in front of you? CBS 3 Anchor Ukee Washington reports, maybe you’ve got a dangerous problem, dim headlights.

Before you even notice it, a clear headlight can become a foggy one.

“People are driving and you can only can see about ten-percent of the light capacity,” said Florida auto restorer Mike Patrick.

And the less you can see, the more likely you will have an accident.

It’s a potentially dangerous problem across the country — including in Philadelphia.

Mechanic Tom Flora showed us headlights at his repair shop in Center City. You can see how much more clear one looks than the other. And it doesn’t take much to cause the problem.

“This is a sealed unit,” said Flora. “Any time you get a crack in it that allows it to get moisture in it, the heat of the lens will cloud the lens over immediately.”

Another way it can fade — the sun. Most headlights today are plastic, not glass, and over years they can yellow. That’s what happened to Gene Borger’s 1988 Volvo. “I could barely see at night when I was driving,” said Borger.

And it can happen to any make and model.

The Alliance for Automobile Manufacturers told CBS 3, replacing a fogged headlight is “routine maintenance,” even if it costs $300 to $1000 a piece.

“I don’t anybody’s budget has $300 to put a headlight in today,” said Flora.

So are today’s headlights defective products? Florida attorney Ralph Patino is considering suing auto and headlight manufacturers. “In order to replace one of these headlights, it’s very, very expensive, and the manufacturers know it,” said Patino.

Florida auto restorer Patrick said, “I believe it’s getting worse because, I hate to say it, but I think a lot of the auto manufacturers are finding ways to cut costs to build their cars, keep more money in their pockets.”

His company markets a product to make a headlight brighter — far less than a replacement.

So how bright does your headlight have to be? It varies by state. Keep an eye on your headlights, so they can keep an eye out for you.

(© MMVI, CBS Broadcasting Inc. All Rights Reserved.)

Headlight Care

Saturday, January 9th, 2010

Headlamp systems require periodic maintenance. Sealed beam headlamps are modular; when the filament burns out, the entire sealed beam is replaced. Most vehicles in North America made since the late 1980s use headlamp lens-reflector assemblies that are considered a part of the car, and just the bulb is replaced when it fails. Manufacturers vary the means by which the bulb is accessed and replaced. Headlamp aim must be properly checked and adjusted frequently, for misaimed lamps are dangerous and ineffective.[12]

Over time, the headlamp lens can deteriorate. It can become pitted due to abrasion of road sand and pebbles, and can crack, admitting water into the headlamp. “Plastic” (polycarbonate) lenses can become cloudy and discoloured. This is due to oxidation of the painted-on lens hardcoat by ultraviolet light from the sun and the headlamp bulbs. If it is minor, it can be polished out using a reputable brand of a car polish that is intended for restoring the shine to chalked paint. In more advanced stages, the deterioration extends through the actual plastic material, rendering the headlamp useless and necessitating complete replacement. Sanding or aggressively polishing the lenses, or plastic headlight restoration, can buy some time, but doing so removes the protective coating from the lens, which when so stripped will deteriorate faster and more severely.

The reflector, made out of vapourised aluminum deposited in an extremely thin layer on a metal, glass or plastic substrate, can become dirty, oxidised, or burnt, and lose its specularity. This can happen if water enters the headlamp, if bulbs of higher than specified wattage are installed, or simply with age and use. Reflectors thus degraded, if they cannot be cleaned, must be replaced.

Headlamp. (2010, January 9). In Wikipedia, The Free Encyclopedia. Retrieved 19:23, January 9, 2010, from

Headlight Lens Cleaners

Saturday, January 9th, 2010

Dirt buildup on headlamp lenses increases glare to other road users, even at levels too low to reduce seeing performance significantly for the driver. Therefore, headlamp lens cleaners are required by ECE Regulation 48 on vehicles equipped with low-beam headlamps using light sources that have a reference luminous flux of 2,000 lumens or more. This includes all HID headlamps and some high-power halogen units. Some cars have lens cleaners fitted as standard or available as optional equipment even where the headlamp specifications and/or prevailing technical regulations do not require them. North America, for example, does not use ECE regulations, and FMVSS 108 does not require lens cleaners on any headlamps, though they are permitted. Lens cleaning systems come in two main varieties: a small motor-driven wiper blade or brush conceptually similar to those used on the windshield of the car, or a fixed or pop-up high-pressure sprayer which cleans the lenses with a spray of windshield washer fluid.

Headlamp. (2010, January 9). In Wikipedia, The Free Encyclopedia. Retrieved 19:23, January 9, 2010, from

Dynamic Headlight Beam Control

Saturday, January 9th, 2010

Headlamp levelling control

The 1948 Citroen 2CV was launched in France with a manual headlamp levelling system, controlled by the driver with knob through a mechanical rod linkage. In 1954, Cibié introduced an automatic headlamp levelling system linked to the vehicle’s suspension system to keep the headlamps correctly aimed regardless of vehicle load. The first vehicle to be so equipped was the Panhard Dyna Z. Beginning in the 1970s, Germany and some other European countries began requiring remote-control headlamp levelling systems that permit the driver to lower the lamps’ aim by means of a dashboard control lever or knob if the rear of the vehicle is weighted down with passengers or cargo, which would tend to raise the lamps’ aim angle and create glare. Such systems typically use stepper motors at the headlamp and a rotary switch on the dash marked “0″, “1″, “2″, “3″ for different beam heights, “0″ being the “normal” (and highest) position for when the car is lightly loaded. Internationalised ECE Regulation 48, in force in most of the world outside North America, currently requires such systems on all vehicles. The regulation stipulates a more stringent version of this antiglare measure for vehicles equipped with headlamp bulbs producing more than 2,000 lumens, such as xenon headlamps; such vehicles must be equipped with headlamp self-levelling systems that sense the vehicle’s degree of squat due to cargo load and road inclination, and automatically adjust the headlamps’ vertical aim to keep the beam correctly oriented without any action required by the driver.

Directional headlamps

1928 Willys-Knight 70A Touring. Notice the directional headlight in the middle.

Directional (steering) headlamps on a Citroën DS—the driver can see his way through curves.

These provide improved lighting for cornering. Some automobiles have their headlamps connected to the steering mechanism so the lights will follow the movement of the front wheels. Czech Tatra and 1920s Cadillacs were early implementer of such a technique, producing in the 1930s a vehicle with a central directional headlamp. The American 1948 Tucker Sedan was likewise equipped with a third central headlamp connected mechanically to the steering system. The 1967 French Citroën DS and 1970 Citroën SM were equipped[44] with an elaborate dynamic headlamp positioning system that adjusted the headlamps’ horizontal and vertical positioning in response to inputs from the vehicle’s steering and suspension systems, though US regulations required this system to be removed from those models when sold in the USA.

Advanced front-lighting system (AFS)

There has been a recent resurgence in interest in the idea of moving or optimizing the headlight beam in response not only to vehicular steering and suspension dynamics, but also to ambient weather and visibility conditions, vehicle speed, and road curvature and contour. A task force under the EUREKA organisation, composed primarily of European automakers, lighting companies and regulators began working to develop design and performance specifications for what is known as advanced front-lighting systems, commonly AFS.[45] Manufacturers such as Toyota,[46] Škoda[47] and Vauxhall/Opel[48] have released vehicles equipped with AFS since 2003.

Rather than the mechanical linkages employed in earlier directional-headlamp systems, AFS relies on electronic sensors, transducers and actuators. Other AFS techniques include special auxiliary optical systems within a vehicle’s headlamp housings. These auxiliary systems may be switched on and off as the vehicle and operating conditions call for light or darkness at the angles covered by the beam the auxiliary optics produce. A typical system measures steering angle and vehicle speed to swivel the headlamps.[49] The most advanced AFS systems use GPS signals to anticipate changes in road curvature, rather than simply reacting to them.[50]

Automatic beam switching

Main article: Automatic headlight dimmer

Even when the high beam is warranted by prevailing conditions, drivers generally do not use them.[51] There have long been efforts, particularly in America, to devise an effective automatic beam selection system to relieve the driver of the need to select and activate the correct beam as traffic, weather, and road conditions change. Early systems like Cadillac’s Autronic Eye appeared in 1952 with an electric eye atop the dashboard (later behind the radiator grill) which was supposed to switch between low and high beam in response to oncoming traffic. These systems could not accurately discern headlamps from non-vehicular light sources such as streetlights, they did not switch to low beam when the driver approached a vehicle from behind, and they spuriously switched to low beam in response to road sign reflections of the vehicle’s own headlamps. Present systems based on imaging CMOS cameras can detect and respond appropriately to leading and oncoming vehicles while disregarding streetlights, road signs, and other spurious signals. Camera-based beam selection was first released in 2005 on the Jeep Grand Cherokee, and has since then been incorporated into comprehensive driver assistance systems by automakers worldwide.

Intelligent Light System

Intelligent Light System is a headlamp beam control system introduced in 2006 which offers five different bi-xenon light functions,[52] each of which is suited to typical driving or weather conditions:

  • Country mode
  • Motorway mode
  • Enhanced fog lamps
  • Active light function
  • Cornering light function

Adaptive Highbeam

Main article: Adaptive Highbeam Assist

Adaptive Highbeam Assist is the newest headlamp technology, introduced in spring 2009 in the new generation Mercedes-Benz E-Class. It is based on camera mounted behind the windshield and automatically and continuously adapts the headlamp range to the distance of vehicles ahead or which are oncoming.

The same technology is also present in the BMW 7 series. BMW’s version of this technology, developed in cooperation with Mobileye, uses swiveling headlights that always point in the direction the vehicle is steering so therefore the road ahead is better illuminated and obstacles become visible sooner

Headlamp. (2010, January 9). In Wikipedia, The Free Encyclopedia. Retrieved 19:23, January 9, 2010, from